Archive | 29. Dny tepelného zpracování - 27.

2019 - 2017

Uniform Magnetic Heating (UMH) – a special thermal treatment process used in large scale production in the automotive and rail industry

Ruecker Nils - pro-beam systems GmbH (Germany)

Fe-Me-B diffusion layers for surface modification of carbon and alloy steels

Mishigdorzhiyn Undrakh - East Siberia State University of Technology and Management (Russia)

Powder as an input parameter of additively produced maraging steel – POSTER

Koukolíková Martina - COMTES FHT a.s. (Czech Republic)

Comparison of the properties NiCrBSi coating remelted by an electron beam with different deflection techniques

Matlák Jiří - VUT v Brně (Czech Republic)

Measurement concentration of gases in hardening shops

Landa Milan - Ing. Milan Landa ( Czech Republic)

Steels for cutlers – structure and properties

Suchánek Vladimír - HANYKO Praha s.r.o. (Czech Republic)

Applications of press hardening steel in car body and its resistance spot welding

Kučera Vojtěch - University of Chemistry and Technology in Prague (Czech Republic)

Low pressure carburizing of large gears in single chamber vacuum oil quenching furnace

Lebigot Philippe - Fours Industry BMI (France)

High pure liquid ammonia 4.0 for heat treatment of metals – COMMERCIAL PRESENTATION

Eršil Tomuáš - GHC Invest, s.r.o. (Czech Republic)

Austenitemeter – Portable Mössbauer spectrometer for rapid and nondestructive determination of austenite content

Pechoušek Jiří - Univerzita Palackého v Olomouci (Czech Republic)

Formation of microstructure during sub-zero treatment of Cr-V ledeburitic steel

Jurči Peter - Slovak University of Technology in Trnava (Slovak Republic)

New developments in the field of thermal electron beam technologies

Zenker Rolf - TU Bergakademie Freiberg (Germany)

Heat treatment of austenitic steel with increased boron content

Kříž Antonín - University of West Bohemia in Pilsen (Czech Republic)

4D Quench – single-piece flow vacuum heat treatment as modern alternative to a press hardening

Przygoński Marcin - SECO/WARWICK S.A. (Poland)

Advanced materialography and hardness testing: Phase transitions in titanium – COMMERCIAL

Tesař Karel - Struers GmbH (Czech Republic)

Robots and their usage in material treatment

Kraus Ladislav - YASKAWA Czech s. r. o. (Czech Republic)

Application of polymeric quenchant in heat treatment

Procházka Luboš - Burgdorf GmbH / ECOSOND s.r.o. (Czech Republic)

Quality requirements in heat treatment

Rašková Stanislava (Czech Republic)

Combustion elemental analysis

Rach Václav - Metalco Testing s.r.o. (Czech Republic)

Optimisation of cleaning process

Konvalinka Roman - SurTec ČR, s.r.o. (Czech Republic)

Heat treatment as part of the process assembly engine

Mráz Jakub - TEDOM a.s. (Czech Republic)

SyncroTherm – applications and processes in vacuum

Schmidt Marcus - ALD Vacuum Technologies GmbH (Germany)

Analysis of the influence of different height during 3D printing on parts from MS1 maraging steel before and after heat treatment

Jirková Hana - University of West Bohemia (Czech Republic)

Use of device for incremental forming of round bars HDQT-R 30-12 for heat and thermo-mechanical treatment of steels

Peković Michale - University of West Bohemia in Pilsen (Czech Republic)

New metalographic machines and consumables for sample preparations

Zapletal Roman - TSI System s.r.o. (Czech Republic)

Predictive maintenance for heat tratment furnaces

Schmiedeke Uwe - IVA Schmetz GmbH (Germany)

Heat Treatment and Industry 4.0 and their links to the ERP systém

Stanislav Jiří - JST Consultancy (Czech Republic)

Some aspects of cryogenic processing of tool steels.

Kolář Zdeněk - Pilana Knives a.s. Hulín (Czech Republic)

Effect of pre and post heat treatments on microstructure and adhesion of AlTiN thin films deposited on selective laser melted Ti6Al4V alloy

Fiorese Alessandro - TAV VACUUM FURNACES SPA (Italy)

Hybrid technology for additive manufactured (AM) components made from AlSi10Mg

Michler Martin - Institute of Materials Engineering - TU Bergakademie Freiberg (Germany)

Fe-Al-Si alloys for applications in internal combustion engines

Novák Pavel - University of Chemical Technology in Prague (Czech Republic)

Choosing a suitable heat treatment regime for stress-relief and microstructure stabilization of Ti6Al4V alloy 3D-printed by SLM method

Roudnická Michaela - University of Chemical Technology in Prague (Czech Republic)

Sintering problems during preparation of Ti-Al-Si alloys

Knaislová Anna - University of Chemical Technology in Prague (Czech Republic)

Thermal treatment of high-strength 3D-printed maraging steel

Strakosova Angelina - University of Chemical Technology in Prague (Czech Republic)

Improving the service life of excavation teeth – POSTER

Hradil David - COMTES FHT a.s. (Czech Republic)

Heat treatment of additively manufactured maraging steel

Kučerová Ludmila - University of West Bohemia in Pilsen, RTI (Czech Republic)

Effects of accelerated microstructural processes on toughness and fatigue behaviour in heat-treated 51CrV4 spring steel

Kotous Jakub - COMTES FHT a.s. (Czech Republic)

Advantages and properties of laser-hardened surfaces

Němeček Stanislav - RAPTECH s.r.o. (Czech Republic)

Properties of cemented carbides with different types of binder after boronising – POSTER

Průcha Vojtěch - University of West Bohemia in Pilsen (Czech Republic)

Volumetrically incomplete phase transition in Ti grade 2

Tesař Karel - Struers GmbH (Czech Republic)

The networked heat treatment shop – The challenge for the heat treatment furnace in the world of Industry 4.0

Hiller Gerald - ECM GmbH (Germany)

Weight Reduction of Automotive Components by Optimized Heat Treatment Processes

Altena Herwig - Aichelin Holding GmbH (Austria)

Metallographic samples preparation before hardness testing

Halász Peter - Struers GmbH

Automatic hardness testing system AMH55

Kuna Jan - LECO Instrumente Plzeň, spol. s r.o. (Czech Republic)

Case depth measurement and analysis

Zapletal Roman - TSI System s.r.o. (Czech Republic)

Parameters which affect distortion and properties in induction heat treating process of tool steels

Hájek Jiří - Západočeská univerzita v Plzni (Czech Republic)

Plasma nitriding and influence of materials

Gorný Róbert - RÜBIG SK k.s. (Slovak Republic)

Influence of operating temperature on rolling bearings – POSTER

Kantoríková Elena - Žilinská univerzita v Žiline (Slovak Republic)

Verification on possibility of nitrogen infiltration into steel by N-quench

Nakamura Atsushi - Toyota Technological Institute (Japan)

Cleaning of parts prior to heat treatment process in vacuum

Konvalinka Roman - SurTec ČR, s.r.o. (Czech Republic)

Plasma nitride layer design of tool steels for optimized load-bearing capacity and adherence of hard coatings

Dalke Anke - TU Bergakademie Freiberg (Germany)

Influence of graphite morphology on the nitriding and wear beahaviour of stable solidified cast iron compared to metastable solidified surface layer of cast iron

Klose Noramann - TU Bergakademie Freiberg (Germany)

Development of an electron beam (EB) welding technique for additive manufactured (AM) AlSi10Mg

Hollmann Paul - TU Bergakademie Freiberg (Germany)

Inspection heat treatment by hardness testing

Josífek Martin - Struers GmbH (Czech Republic)

Heat treatment of tool forged by repeated alternate upsetting and drawing out

Kříž Antonín - ZČU v Plzni (Czech Republic)

Experiences with the application of the NADCA standard in the hardening shop

Tesárková Klára - Bodycote HT, s.r.o. (Czech Republic

Effect of sub-zero treatment on properties of tool steels

Jurči Peter - STU Trnava (Slovak Republic)

Wear resistance of D2 cold work tool steel after gas nitriding combined with deep cryogenic treatment

Hradil David - COMTES FHT a.s. (Czech Republic)

Possibilities of complete automation in metallographic sample preparation and hardness testing in thermal processing operations

Černický David - Metalco Testing s.r.o. (Czech Republic)

Improvement of wear resistance of austenitic steel by combined treatment using electron beam cladding and subsequent plasma nitrocarburizing

Hegelmann Eugen - TU Bergakademie Freiberg (Germany)

Study of differences between results from laboratory tests and tests of real tools for selected cold work tool steels

Kuřík Martin - ČVUT Praha + CZECHmetal s.r.o. (Czech Republic)

Modernization of control system of old vacuum furnaces using PC and Control Web

Kolář Zdeněk - Manobike Zdeněk Kolář (Czech Republic)

Metallurgical understanding of the effect of cryogenic treatment of tool steel

Somers Marcel A.J. + Villa Matteo - Technical University of Denmark (Denmark)

NADCA 207-2016 AS quality manual for heat treatment of hot works steels

Stanislav Jiří - JST Consultancy (Czech Republic)

Refractory Metals in Furnace Construction and Engineering

Průša Václav - Plansee SE (Austria)

Low pressure carburizing and annealing in aircraft industry

Beck Natalie - ALD Vacuum Technologies GmbH (Germany)

Service of vacuum furnaces and graphite chambers

Hošek Václav - Kompozitum / ECOSOND s.r.o.

Přehled vakuových pecí pro procesy tepelného zpracování

Dappa Andreas - IVA Schmetz GmbH (Germany)

Vacuum in Heat Treatment Processes and equipments

Stolař Pavel - ECOSOND s.r.o. (Czech Republic)

Process media in vacuum heat treatment. Liquid quenchants and stop-off paints – properties and application

Braun Rainer - Burgdorf GmbH (Germany)

Fracture toughness and wear resistance of hot work tool steel related to heat treatment conditions

Podgornik Bojan - IMT (Slovenia)

Adjustment of the heat treatment of 1.4313 steel for the improvement of mechanical treatment of dynamically loaded parts – POSTER

Ječminková Šárka - Howden ČKD Compressors, University of Chemical Technology in Prague (Czech Republic)

Properties of Ni-Ti-(Fe,Co,Al) shape memory alloys prepared by self-propagating high-temperature synthesis – POSTER

Salvetr Pavel - University of Chemical Technology in Prague (Czech Republic)

Microstructure and thermal stability of Al-Fe-X alloys – POSTER

Školáková Andrea - University of Chemical Technology in Prague (Czech Republic)

Preparation of TiAl15Si15 alloy by high pressure spark plasma sintering (HP SPS) – POSTER

Knaislová Anna - University of Chemical Technology in Prague (Czech Republic)

Technical and metallurgical criteria for installation of isothermal annealing station for car gearbox forgings

Zimmermann D. - Bosio (Germany)

Influence of heat treatment parameters onto tempering curve for selected cold working tool steel – POSTER

Kuřík M. - Czech Technical University in Prague (Czech Republic)

Microstructure and tempering response of Vanadis 6 steel after sub-zero treatment at -140 °C – POSTER

Ptačinová Jana - Slovak University of Technology in Trnava (Slovak Republic)

Microstructural evaluation of tool steel Vanadis 6 after sub-zero treatment at -140°C without tempering – POSTER

Ďurica Juraj - Slovak University of Technology in Trnava (Slovak Republi

LECO AMH55 Hardness Testing Systems – COMPANY PRESENTATION

Kuna Jan - LECO Instrumente Plzeň, spol. s r.o. (Czech Republic)

Customer-specific, flexible induction hardening machine for hardening workshop

Fisher Lukas - ITG Induktionsanlagen GmbH (Germany)

Mathematical modeling of the effect of main boroaluminizing factors on the diffusion layer thickness of low-carbon steel

Mishigdorzhiyn Undrakh - East Siberia State University of Technology and Management (Russian Federatioin)

Experimental modelling of materials properties and microstructure of new UHS steels usable for press-hardening – POSTER

Opatová Kateřina - University of West Bohemia (Czech Republic)

Equipment and technologies for vacuum heat treatment

Przygoński Marcin - SECO/WARWICK S.A. (Poland)

Metallographic observation for evaluating microstructural evolution on various cross-sections of forged part upon air-cooling from finishing temperature – POSTER

Jeníček Štěpán - University of West Bohemia (Czech Republic)

Use of the Press Hardening Technology for Treatment of TRIP Steel

Jirková Hana - University of West Bohemia (Czech Republic)

LAM PLAN technology for preparation of metallographic samples

Keller Libor - TSI System s.r.o. (Czech Republic)

Graphite materials for high-temperature applications

Bujna - KOMPOZITUM s.r.o. (Slovak Republic)

Properties of cemented carbides upon deep freezing

Kříž Antonín - ZČU v Plzni (Czech Republic)

Properties of electron beam hardened layers made by different beam deflection

Matlák Jiří - VUT Brno (Czech Republic)

New treatment route for closed-die forgings of steels with 2.5% manganese

Bublíková Dagmar - ZČU v Plzni (Czech Republic)

Prediction of internal stresses in heat treatment processes

Šuchmann Pavel - COMTES FHT a.s. (Czech Republic)

Heat treatment of the TRIP steel with partial substitution of silicon by aluminium

Kučerová Ludmila - ZČU v Plzni (Czech Republic)

Effects of Q&P process parameters on properties of 42SiCr steel – POSTER

Rubešová Kateřina - ZČU v Plzni (Czech Republic)

Simultaneous Enhancement of Wear Performance and Toughness of Tool Steel by Subzero Treatment – Real Opportunity or Fiction

Jurči Peter - STU Trnava (Slovak Republic)

Flow modeling of the quenching medium

Stolař Pavel - ECOSOND s.r.o. (Czech Republic)

Solutions for implementing “Industry 4.0” for modern heat treatment plants

Ritter Karl - ALD Vacuum Technologies GmbH (Germany)

Influence of beam guidance technique and process parameters during electron beam remelting of cast iron on ledeburite morphology and the subsequent formation of nitride layers

Holst Anja - TU Bergakademie Freiberg ( Germany)

The heat treatment of steels in the light of the principle sufficient hardenability

Pacyna Jerzy - AGH Universtiy of Science and Technology (Poland)

Investigation of electron beam surface remelting of plasma nitrided spray-formed hypereutectic Al-Si alloy

Hegelmann Eugen - TU Bergakademie Freiberg (Germany)

New Sealed Quench Furnace Innova 4.0 – First Experiences from Practice

Wethmar Richard - IVA Schmetz GmbH (Germany)

What do not speak CQI-9

Landa Milan - Ing. Milan Landa (Czech Republic)

Thermal treatment of 3D-printed titanium alloy

Fousová Michaela - VŠCHT Praha (Czech Republic)

Effect of the heat treatment on the bioactivity of nanostructured surfaces

Hybášek Vojtěch - VŠCHT Praha (Czech Republic)

High-temperature oxidation of intermetallics based on Ti-Al-Si system

Knaislová Anna - VŠCHT Praha (Czech Republic)

High-temperature behaviour of new Fe-Al-Si alloy produced by powder metallurgy

Novák Pavel - VŠCHT Praha (Czech Republic)

Influence of the heat treatment to mulcher tool durability in operation

Ťavodová Miroslava - Technická univerzita Zvolen (Slovak Republic)

The causes which may affect life of casting moulds – WN 1.2343

Rašková Stanislava - Czech Republic

Requirements for quality management systems update technical specifications IATF 16949:2016

Rašková Stanislava - Czech Republic

Advanced solutions for material analysis in powder metallurgy

Černický David - Metalco Testing s.r.o. (Czech Republic)

Development of the Tube Quenching Unit in Třinecké železárny a.s.

Hnízdil Milan - VUT FSI Brno (Czech Republic)

The investigations of quenching process for improving the flatness of the hot rolled steel plate

Yu-Cheng Liou - National Cheng Kung University (Taiwan)

Effect of microstructure on the steel A694 F60 toughness values KV-46

Foret Rudolf - VUT FSI v Brně (Czech Republic)

Controlled aging profiles age hardening – working diagnostics

Skrbek Břetislav - TU Liberec (Czech Republic)

How different steel grades react to a low pressure nitriding process: influence of alloying elements

Lebigot Philippe - Fours Industriels BMI (France)

Application of deep cryogenic treatment in the nitriding process

Hradil David - COMTES FHT a.s. (Czech Republic)

Factors influencing hardness-testing measurements: In total 44 factors separated to groups, explanation how avoid their influence

Josífek Martin - Struers GmbH (Czech Republic)

Advanced metallography techniques of sample preparation: Microstructure analysis of phase transformation after thermal treatment in commercially pure Ti

Gärtnerová Viera - Struers GmbH (Czech Republic)

Vacuum heat treatment of quality steels CPM 10V A CPM 10V AQ

Tesárková Klára - Bodycote HT, s.r.o. (Czech Republic

Technologies of the HEF Group for surface engineering with focus on PVD/PACVD, nitriding and special technologies – COMPANY PRESENTATION

Gerstenberger Jan - HEF-DURFERRIT s.r.o. (Czech Republic)

Cleaning as an essential step prior heat treatment

Konvalinka Roman - SurTec ČR, s.r.o.

Liquid quenchants, properties and range of application, new research and development in the field of liquid quenchants

Süss Rainer - Burgdorf GmbH (Germany)

Parts cleaning before and after heat treatment of metals

Vráblík Filip - Ecosond s.r.o. (Czech Republic), Burgdorf GmbH (Germany)

Increase tool service life for wood cutting by cryogenic treatment

Kolář Zdeněk - Pilana Tools (Czech Republic)

Low Pressure Carburizing and High Pressure Gas Quenching of Chromium-Alloyed PM Parts

Pouloux Patrick - ECM Technologies (France)

Heat treatment fixtures, alloys and design

Pálka Stanislav - Cronite CZ (Czech Republic)

New trends in measurement and control of heat treatment processes

Baumann Jens - Process-Electronic GmbH (Germany)

Gas nitriding process control with variable nitriding potential for up to 50% NH3 saving

Theisen Frank - STANGE Elektronik GmbH (Germany)

Cost- and Resource Effective Surface Layer Heat Treatment in Gear, Tool, Aeronautic, Oilfield and Automotive Industry by PulsPlasma®Nitriding

Voigtländer Dietmar - PVA Industrial Vacuum Systems GmbH (Germany)