List of Papers

Weight Reduction of Automotive Components by Optimized Heat Treatment Processes

Altena Herwig - Aichelin Holding GmbH (Austria)

High pure liquid ammonia 4.0 for heat treatment of metals – COMMERCIAL PRESENTATION

Eršil Tomuáš - GHC Invest, s.r.o. (Czech Republic)

Effect of pre and post heat treatments on microstructure and adhesion of AlTiN thin films deposited on selective laser melted Ti6Al4V alloy

Fiorese Alessandro - TAV VACUUM FURNACES SPA (Italy)

The networked heat treatment shop – The challenge for the heat treatment furnace in the world of Industry 4.0

Hiller Gerald - ECM GmbH (Germany)

Improving the service life of excavation teeth – POSTER

Hradil David - COMTES FHT a.s. (Czech Republic)

Analysis of the influence of different height during 3D printing on parts from MS1 maraging steel before and after heat treatment

Jirková Hana - University of West Bohemia (Czech Republic)

Formation of microstructure during sub-zero treatment of Cr-V ledeburitic steel

Jurči Peter - Slovak University of Technology in Trnava (Slovak Republic)

Sintering problems during preparation of Ti-Al-Si alloys

Knaislová Anna - University of Chemical Technology in Prague (Czech Republic)

Some aspects of cryogenic processing of tool steels.

Kolář Zdeněk - Pilana Knives a.s. Hulín (Czech Republic)

Optimisation of cleaning process

Konvalinka Roman - SurTec ČR, s.r.o. (Czech Republic)

Effects of accelerated microstructural processes on toughness and fatigue behaviour in heat-treated 51CrV4 spring steel

Kotous Jakub - COMTES FHT a.s. (Czech Republic)

Powder as an input parameter of additively produced maraging steel – POSTER

Koukolíková Martina - COMTES FHT a.s. (Czech Republic)

Robots and their usage in material treatment

Kraus Ladislav - YASKAWA Czech s. r. o. (Czech Republic)

Heat treatment of austenitic steel with increased boron content

Kříž Antonín - University of West Bohemia in Pilsen (Czech Republic)

Applications of press hardening steel in car body and its resistance spot welding

Kučera Vojtěch - University of Chemistry and Technology in Prague (Czech Republic)

Heat treatment of additively manufactured maraging steel

Kučerová Ludmila - University of West Bohemia in Pilsen, RTI (Czech Republic)

Measurement concentration of gases in hardening shops

Landa Milan - Ing. Milan Landa ( Czech Republic)

Low pressure carburizing of large gears in single chamber vacuum oil quenching furnace

Lebigot Philippe - Fours Industry BMI (France)

Comparison of the properties NiCrBSi coating remelted by an electron beam with different deflection techniques

Matlák Jiří - VUT v Brně (Czech Republic)

Hybrid technology for additive manufactured (AM) components made from AlSi10Mg

Michler Martin - Institute of Materials Engineering - TU Bergakademie Freiberg (Germany)

Fe-Me-B diffusion layers for surface modification of carbon and alloy steels

Mishigdorzhiyn Undrakh - East Siberia State University of Technology and Management (Russia)

Heat treatment as part of the process assembly engine

Mráz Jakub - TEDOM a.s. (Czech Republic)

Advantages and properties of laser-hardened surfaces

Němeček Stanislav - RAPTECH s.r.o. (Czech Republic)

Fe-Al-Si alloys for applications in internal combustion engines

Novák Pavel - University of Chemical Technology in Prague (Czech Republic)

Austenitemeter – Portable Mössbauer spectrometer for rapid and nondestructive determination of austenite content

Pechoušek Jiří - Univerzita Palackého v Olomouci (Czech Republic)

Use of device for incremental forming of round bars HDQT-R 30-12 for heat and thermo-mechanical treatment of steels

Peković Michale - University of West Bohemia in Pilsen (Czech Republic)

Application of polymeric quenchant in heat treatment

Procházka Luboš - Burgdorf GmbH / ECOSOND s.r.o. (Czech Republic)

Properties of cemented carbides with different types of binder after boronising – POSTER

Průcha Vojtěch - University of West Bohemia in Pilsen (Czech Republic)

4D Quench – single-piece flow vacuum heat treatment as modern alternative to a press hardening

Przygoński Marcin - SECO/WARWICK S.A. (Poland)

Combustion elemental analysis

Rach Václav - Metalco Testing s.r.o. (Czech Republic)

Quality requirements in heat treatment

Rašková Stanislava (Czech Republic)

Choosing a suitable heat treatment regime for stress-relief and microstructure stabilization of Ti6Al4V alloy 3D-printed by SLM method

Roudnická Michaela - University of Chemical Technology in Prague (Czech Republic)

Uniform Magnetic Heating (UMH) – a special thermal treatment process used in large scale production in the automotive and rail industry

Ruecker Nils - pro-beam systems GmbH (Germany)

SyncroTherm – applications and processes in vacuum

Schmidt Marcus - ALD Vacuum Technologies GmbH (Germany)

Predictive maintenance for heat tratment furnaces

Schmiedeke Uwe - IVA Schmetz GmbH (Germany)

Heat Treatment and Industry 4.0 and their links to the ERP systém

Stanislav Jiří - JST Consultancy (Czech Republic)

Thermal treatment of high-strength 3D-printed maraging steel

Strakosova Angelina - University of Chemical Technology in Prague (Czech Republic)

Steels for cutlers – structure and properties

Suchánek Vladimír - HANYKO Praha s.r.o. (Czech Republic)

Volumetrically incomplete phase transition in Ti grade 2

Tesař Karel - Struers GmbH (Czech Republic)

Advanced materialography and hardness testing: Phase transitions in titanium – COMMERCIAL

Tesař Karel - Struers GmbH (Czech Republic)

New metalographic machines and consumables for sample preparations

Zapletal Roman - TSI System s.r.o. (Czech Republic)

New developments in the field of thermal electron beam technologies

Zenker Rolf - TU Bergakademie Freiberg (Germany)

List of Papers

Archive